Description Of The Signaling Leds - GE TLE 160 User Manual

6.1.2 Description of the signaling LEDs

LEDS UPS STATUS
When lit, indicates that the UPS is functioning correctly and the Load is system protected (Load
supplied either from Inverter or from Automatic Bypass in case of eBoost™ Operation Mode).
When blinking, indicates that a regular maintenance service is needed (SERVICE REQUIRED).
May be reset by a GE Service Technicians only.
See Section 9 – Maintenance – Service check.
The LED is OFF when the output switch Q1 is open, indicating that the Inverter is in service mode, not
supplying the Load.
Modifications reserved
GE_UPS_USM_TLE_SUL_M16_M50_2bU_V010.docx
Critical Power
Fig. 6.1.2-1 LCD screen
UPS model
Date (format "MM/DD/YYYY").
Time AM or PM (format "HH.MM.SS").
eBoost (green color)
LED ON/lit indicates that the UPS is operating in eBoost™ mode.
IEMi (green color)
LED ON/lit indicates that the UPS is operating in IEMi mode.
Service Key (yellow color)
Key for disabling the Service Key procedure.
Used only by the GE Service Center.
LED LOAD PROTECTED (green color)
Page 26/91
User Manual TLE Series 160 - 500 UL S2B