Pdf Creation; Figure 7-8 The Upgrade Device Dialog Box - Olympus BondMaster 600 User Manual

DMTA-10045-01EN, Rev. E, August 2016
6. Under Bin Selection in the Upgrade Device dialog box, choose the location of the
BondMaster 600 software, and then select Application and FPGA (see Figure 7-8
on page 178).
7. Click Start to begin the update.
8. When the software update process has been completed, turn off the
BondMaster 600, and then turn it back on again to activate the upgrade.
7.4

PDF Creation

BondMaster PC allows you to export inspection reports to a PC hard drive or memory
device. You can either create an individual PDF file from selected data or export all
data as a series of PDF files.
If you select the Export All Files As Adobe Acrobat (PDF) option, all stored data on
the BondMaster 600 instrument will automatically be selected and used to create
individual PDF files that will be saved in a specified location. At the end of this
process, the individual PDF files may be reviewed and printed using Adobe Acrobat
or equivalent software. It is important to choose the destination folder (to which the
files are to be exported) before exporting data in a PDF file.
To create a single PDF file from selected data
 Select the file in the left pane of the BondMaster PC window (see Figure 7-9 on
page 179), and then select Export As > PDF (see Figure 7-10 on page 179).
178 Chapter 7
Figure 7‑8 The Upgrade Device dialog box