Appendix B: Function Summary Chart - Ametek Gemco 2120 Installation Manual

Spec Tech Industrial Electric

Appendix B: Function Summary Chart

This Appendix contains three function summary charts: B-1: General Function Summary, B-2
Resolver Specifi c Function Summary, and B-3: LDT - Specifi c Function Summary. The
General Function Summary contains function summaries which apply to both a resolver and
LDT based system.
Function Number
10 Program Mode Access
11 Program Mode Time-Out
Move Detection Time-Out
12
and/or the position Hold's
dwell time
Decimal Location
13
Unit of Measurement
14
Position Hold
15
16 Auxiliary LED
New Access Code
90
400 Upper End Limit
401 Lower End Limit
402 Relay State
Spec Tech Industrial Electric
www.spectechind.com
Function Name
This function is used to put the monitor in either pro-
gram or supervisory mode.
This function is used to change the duration of time the
monitor will stay in program mode once the Program
Mode Access function is entered.
This function is used to program the time the Interface
Module must move within when power is applied to
the move detection input. This function also can be
used to program the Position Hold function's dwell
time.
This function is used to program the resolution of the
Interface module and all position data shown on the
monitor's LED display.
This function is used to select the unit of measurement
for the Interface Module and all position data.
This function is used in applications where it is neces-
sary to stop the monitor from updating the Interface
Module display during periods of high vibration.
This function is used to enable the monitor's auxiliary
LED.
This function is used to change the current program
mode access code.
This function is used to program the upper end limit of
the Interface Module opening.
This function is used to program the lower end limit of
the Interface Module opening.
This function is used to program the monitor's upper
and lower limit relays to either energize or de-energize
when the monitor is in normal machine operation.
Installation and Programming Manual
www.spectechind.com
888-773-2832
Appendix B: Function Summary
Description
888-773-2832
51