Using The Time And Timer Function - Bosch OptiMUM MUM9 Series Instruction Manual

Press the release button and raise
the swivel arm to the stop.
Add the ingredients directly to the bowl.
Press the release button and push the
swivel arm down until it locks into place.
appears on the display.
Continue processing your ingredients.
The appliance features a time and timer
function. The following functions are
available:
Display of the elapsed processing duration
(standard setting). The
starts automatically once the processing of
food has been started.
Press button A briefly during processing
to switch on the
Hold button A down during processing
to reset the display to
Setting of a required duration. Once the
duration has elapsed, an acoustic signal
will sound and processing will stop.
The function may also be used without
processing food (e.g. for boiling or resting
times of food).
X I m age sequence
Prepare the appliance. Add ingredients.
1 .
Plug the mains plug into the mains.
appears on the display.
Press button A.
display.
Set the required processing duration using
button + or -. The values will change
faster if the respective button is pressed
and held down. The set processing
duration will remain saved for approx.
5 minutes.
Set the rotary switch to the required setting.
The remaining duration will be shown
on the display and the countdown will
continue.
function
function.
.
I
appears on the
Using the time and timer function
Once the remaining duration has
elapsed, an acoustic signal will sound
and the appliance will stop processing
automatically.
the display.
Setting the acoustic signal
X "S e ttings" see page 9
8 . "T U R N
the display.
Turn the rotary switch to y.
appears on the display.
Disconnect the mains plug.
Processing with the
ended.
Clean all parts immediately after use.
X "C l eaning and maintenance" see
page 1 5
N o tes:
The duration is indicated on the display
in minutes and seconds. Example:
1 minute and 30 seconds:
duration is 60 minutes or more, hours
are also displayed:
Press button + or - at any time to adjust
the displayed remaining duration.
Press button A briefly twice to stop the
timer (the appliance will continue to run) or
to start it again.
Turn the rotary switch to E to interrupt
processing. The remaining duration
remains saved and the countdown will
continue after the appliance is switched on
again.
Hold down button A to switch the timer off.
appears on the display. The
function has been activated again.
■ Press button A.
display.
■ Set the required processing duration using
button + or -.
■ Press button A briefly twice to start the
timer.
■ The remaining duration will be shown
on the display and the countdown will
continue.
appears on
appears on
function is
. If the
.
appears on the
11