Rnet Configuration - Aurora UPC ZS ZONE SENSOR Installation Manual

AURORA UPC ZS ZONE SENSORS INSTALLATION GUIDE
NOTES
What are ZS sensors?

Rnet configuration

WARNING
You can use wireless sensors, ZS sensors, and an Equipment Touch on the same Rnet. The number of sensors
you can use on a controller's Rnet depends on how many control programs it can have. If the controller supports:
Only one control program, the Rnet can consist of:
Up to 5 ZS sensors
One Wireless Adapter supporting up to 5 wireless sensors
One Equipment Touch
NOTE You can have any combination of ZS and wireless sensors, but no more than 5 sensors total.
Multiple control programs, the Rnet can consist of:
Up to 15 ZS sensors
One Wireless Adapter supporting up to 15 wireless sensors
One Equipment Touch
NOTES
You can have any combination of ZS and wireless sensors, but no more than 15 sensors total.
You can have no more than 5 sensors per control program.
CAUTIONS
WARNING
You cannot have
An Rnet can have more than one wireless Pro-F sensor, however, changing the setpoint on one Pro-F will not
be reflected on the display of another Pro or Pro-F, possibly causing confusion for the user.
CAUTIONS
sensors on the same Rnet with any of the above devices.
Logic
Logic
6