Table of Contents
Advertisement
Connections
Connecting Cables
Connecting Cables(NotePC)
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
•
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
Note
If the monitor and the computer are connected, you can turn them on and use them.
Connecting Cables(PC)
Connect the power cord for your monitor to the power port on the back of the monitor.
[RGB IN]
Advertisement
Table of Contents
