Personal Safety Equipment; Slope Operation - Husqvarna Z560X Operator's Manual

SAFETY
•
engine and wait for all parts to come to a full
the grass catcher or unclogging the discharge
guard.
• Do not operate the machine while under the
•
across roadways.
•
machine into a trailer or truck.
• Always wear eye protection when operating
machine.
WARNING!
approved personal protective equipment must
be used. Personal protective equipment cannot
remove the risk of injury but it will reduce the
degree of injury if an accident does occur.
Speak to your retailer for aid in choosing the
right equipment.
• Wear correct Personal Protective Equipment
and hearing protection. Do not mow in shorts
and/or footwear with open toes.
• Data shows that operators age 60 years and
above are involved in a large percentage of
riding mower-related injuries. These operators
must evaluate if they can safely operate the
and others from serious injury.
• Obey the manufacturer's recommendation for
wheel weights or counterweights.
•
debris buildup which can touch hot exhaust or
engine parts and burn. Do not let the mower
deck plow leaves or other debris that can cause
a buildup to occur. Clean oil or fuel spillage
before operating or storing the machine.
• Let machine cool before storage.

Personal Safety Equipment

•
aid equipment is
near at hand when
using the machine.
• Do not use the
machine when
barefoot.
• Always wear
protective shoes or boots. Steel toe caps are
recommended.
8
• Always wear approved protective glasses or a
full visor when assembling or driving.
• Always wear gloves when handling the blades.
• Do not wear loose clothing that can become
caught in moving parts.
•

Slope Operation

Slopes are a major cause related to loss of
severe injury or death. Operation on slopes
requires more care. If you cannot back up the
•
slopes (10 degrees
across.
•
other hidden objects.
could overturn the machine. Tall grass can hide
obstacles.
• Select a low ground speed so it will not be
necessary to stop while on the slope.
• Do not mow on wet grass. Tires can lose
traction.
•
continue slowly straight down the slope.
•
gradually on slopes.
Do not make
sudden changes in
which could cause
machine to roll over.
•
operating machine with grass catchers or other
attachments; the stability of the machine can be
• Do not use on steep slopes.
• Do not try to stabilize the machine by putting a
foot on the ground.
•
embankments. The machine could suddenly
roll over if a wheel is over the edge or the edge
caves in.
WARNING! Do not drive up or down hills
with slopes greater than 10 degrees. Do not
drive across slopes.
DATOS TÉCNICOS
Tornillos de polea de corte 203 Nm
Tuercas del asa 102 Nm
Tornillo de la cuchilla 122 Nm
ORNILLOS HEXÁGONOS
Los valores de par indicados se deben utilizar como pauta general
Tornillería estándar de EE. UU.
Grado SAE grado 5
pies/lbs Nm
1/4 9 12
5/16 18 24
3/8 31 42
7/16 50 68
1/2 75 102
9/16 110 149
5/8 150 203
3/4 250 339
7/8 378 512
1-1/8 782 1060
Tornillería estándar en sistema métrico
Grade Grade 8.8
pies/lbs Nm
1.5 2
3 4
5.2 7
8.2 11
13.5 18
24 33
43.5 59
70.5 96
108 146
142 193
195 264
276 374
353 478
530 719
Sujetadores estándar 12 Nm
Sujetadores estándar 25 Nm
Sujetadores estándar 44 Nm
Sujetadores estándar 70 Nm
Sujetadores estándar 110 Nm
SAE grado 8 Tornillo Flangelock con
tuerca Flangelock
pies/lbs Nm pies/lbs
13 18
28 38 24
46 62 40
75 102
115 156
165 224
225 305
370 502
591 801
1410 1912
Grade 10.9 Grade 12.9
pies/lbs Nm pies/lbs
2.2 3 2.7
4.5 6 5.2
7.5 10 8.2
12 16 15
18.8 25 21.8
35.2 48 43.5
62.2 84 75
100 136 119
147 199 176
202 274 242
275 373 330
390 529 471
498 675 596
735 996 904
Nm
33
54
Nm
3.7
7
11
20
30
59
102
161
239
328
447
639
808
1226
77