Vci Connector (Only Applies To 12V Cars) - LAUNCH TECH X-431 Torque User Manual

1 VOLUME +/- Key
2 POWER Key
3 LCD Screen
4 Speakers
USB/Charging
5
Port
Adjustable
6
Kickstand
7 Rear Camera

2.3 VCI Connector (Only applies to 12V cars)

The VCI connector works as a vehicle communication interface device, which is
used to connect to the vehicle's DLC (Data Link Connector) socket directly or via
OBD II extension cable to read the vehicle data and then send it to the X-431
Torque handset via Bluetooth.
To adjust the volume.
In Off mode, press it for 3 seconds to turn the
handset on.
In On mode:
 Press it to activate the LCD if the LCD is off.
 Press it to turn off the LCD if the LCD lights up.
 Press it for 3 seconds to turn it off.
 Press it for 8 seconds to perform forced
shutdown.
 To connect to AC outlet for charging.
 To connect to PC for data exchange.
Flip out it to any angle and work comfortable at
your desk, or hang it on automotive part.
5
X-431 Torque User Manual