Orientation; About; Login/Exit From Current Account - LAUNCH TECH X-431 Torque User Manual

tap "Printing test" to test the printing.
Now you can use the Wi-Fi printer to print!
If the printer is not found, please reset the printer to default factory settings (refer
to Step 2 for details) and check whether the current device and the printer are on
the same LAN.
B. If you have configured the Wi-Fi printer to the LAN:
2. Tap "Connect to Printer":
a). If the local network remains as it is, tap "Test Print" directly to test the
printing.
b). If the local network changes, you have to reset the Wi-Fi printer.

9.8.4 Orientation

X-431 Torque supports 3 kinds of display mode: Auto, Horizontal and Vertical.
When "Auto" is applied, the system will rotate the contents of the screen when
the handset is rotated.

9.8.5 About

The software version information and disclaimer are included.

9.8.6 Login/Exit from current account

To logout the current user ID, tap "Exit from current account".
To login the system again, tap "Login".
X-431 Torque User Manual
Fig. 9-10
73