Sliding Door - Delfield F5MR48N Installation, Operation And Maintenance Manual

F5 & F15 Series Service and Installation Manual

Sliding Door

All Delfield F5 Series and F15 Series display cases feature
a sliding door assembly. A typical sliding door assembly is
shown in the illustration at right.
Maintenance
Frequent, regular cleaning with a mild soap and water solution
will keep the tracks free of foreign matter and will insure many
years of service.
The glass may be cleaned with one of the many commercial
glass cleaners available.
If it becomes necessary to replace a sliding door as sem bly
or a glass panel, have your unit's model and serial numbers
available when you call KitchenCare (844) 724-2273. Indicate
that your unit has the sliding door assembly when you call.
Standard With Door Lock
Sliding Door Removal
Open the door almost completely. Firmly grasp both sides of
the door. Lift the door up and move it until it enters a notch
and can be lifted higher. Tilt the bottom out without removing
the top. Use the top to gently return the spring to the closed
position. Remove the door from the top track.
Sliding Door Reinstall
There is a notch in the top inside corner of the door. Put the
spring in the door's notch and move the spring to the open
position. Put the top into the track and find the notch where the
door can be lifted higher. Set bottom of the door into the track.
See-thru Panel
14