Delfield F5MR48N Installation, Operation And Maintenance Manual page 12

F5 & F15 Series Service and Installation Manual
Maintenance, continued
Doors/Hinges
Over time and with heavy use the doors hinges may become
loose. If this happens tighten the screws that mount the hinge
brackets to the frame of the unit. Loose or sagging doors can
cause the hinges to pull out of the frame, which may damage
both the doors and the hinges. In some cases this may require
qualified service agents or maintenance personnel to perform
repairs.
Do not place hot pans on/against the blue ABS liner.
Do not throw items into the storage area. Failure
to follow these recommendations could result in
damage to the interior of the cabinet or to the blower
coil. Overloading the storage area, restricting the
airflow, and continuous opening and closing of the
doors and drawers will hamper the units ability to
maintain operational temperature.
Preventing blower coil corrosion
To help prevent corrosion of the blower coil, store all acidic
items, such as pickles and tomatoes, in sealable containers.
Immediately wipe up all spills.
Cleaning the condensate evaporator (remote models only)
The stainless steel condensate evaporator pan should be
cleaned every six months. Use a vacuum cleaner or damp cloth
to remove dust that may have accumulated. This will prevent
corrosion of the stainless steel.
12