Advertisement
Quick Links
TM
3-N-1
Gaming Theater
Model # XLGTD52-7K
U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to
the store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
www.whalenfurniture.com
ONLINE:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
®
VAS
8:30 a.m. - 4:30 p.m. PST, Monday - Friday
Video Instruction Guides
Go to http://whalen.showuhow.com to view step-by-step instructional
videos for assembling and installing your product. Enter the following
product number on the ShowUhow homepage.
XLGTD52-7K
Page 1
LOT NUMBER:
DATE PURCHASED:
TM
TV Console
parts@whalenfurniture.com
EMAIL:
/
/
Factory # 33-10944
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VAS 3-N-1 Gaming Theater
Summary of Contents for VAS 3-N-1 Gaming Theater
- Page 1 LOT NUMBER: DATE PURCHASED: 3-N-1 Gaming Theater TV Console Model # XLGTD52-7K U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
- Page 2 Model # XLGTD52-7K M A X I M U M R E C O M M E N D E D W E I G H T L O A D S ® MANUFACTURER: VAS CATALOG: 3-N-1 Gaming Theater TV Console (XLGTD52-7K)
- Page 3 Model # XLGTD52-7K Parts and Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A- Top Shelf Frame (1) B- Base Assembly (1) C- Left Front Post (1) D- Right Front Post (1) E- Short Spine (1) F- Wood Back Support (2) G- Glass Top (1)
- Page 4 Model # XLGTD52-7K Parts and Hardware List (4) 1” Bolt (8+1 extra) (5) 1-1/4” Bolt (4+1 extra) (6) 2-1/4” Bolt (4+1 extra) (7) Lock Washer (34+2 extra) (8) Flat Washer (34+2 extra) (9) Glass Clamp w/Bolt (4+1 extra) (10) Concrete Anchor (11) 2-1/2”...
- Page 5 Model # XLGTD52-7K Assembly Instructions Note: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make it easier during assembly of unit. 1. Unpack the unit and confirm that you have all the hardware and required parts listed. 2.
- Page 6 Model # XLGTD52-7K Assembly Instructions 3. Stand the last assembly upright. Attach the Short Spine (E) to the back of the Base Assembly (B) using four 3/4” Bolts (3) with Lock Washers (7) and Flat Washers (8). Tighten the Bolts with the provided M4 Allen Wrench. Flat Washer 3/4”...
- Page 7 Model # XLGTD52-7K Assembly Instructions 4. Align and attach the Top Shelf Frame (A) between the Front Posts (C and D) and Spine (E). Make sure that the top edges are flush with each other and that the gaps and offsets between the front rail of the Top Shelf Frame and the Posts are equal.
- Page 8 Model # XLGTD52-7K Assembly Instructions 5. Attach 2 Wood Back Supports (F) to the back rail of the Metal Frames (A and B) using eight 1” Bolts (4) with Washers (7 and 8). Make sure all the threaded inserts for the Glass Clamps are level with each other.
- Page 9 Model # XLGTD52-7K Assembly Instructions 6. Go back and tighten all the bolts with the enclosed Allen Wrench. 7. Adjust the pre-attached Floor Levelers on the bottom of the Base Assembly (B) and Front Posts (C and D) to level the unit. ®...
- Page 10 Model # XLGTD52-7K If you choose Table-top configuration, continue to next step. If mounting TV with the Swinging Floater, skip ahead to PAGE 14. Assembly Instructions 8. Attach the Gaming Guitar Clip (O) and Cable Wheel (P) vertical onto the backside of Short Spine (E).
- Page 11 Model # XLGTD52-7K Assembly Instructions 10. Put the Suction Cups (1) firmly into the top holes of Top Shelf Frame (A) and attach the Glass Clamps (9) to the threaded inserts on both Front Posts (C and D) and Wood Back Supports (F).
- Page 12 Model # XLGTD52-7K Assembly Instructions 12. Remove the tape of Acrylic Stopper (13) and place it in the cut-out of the Acrylic Stopper template on the front of the Glass Top (G). Make sure it is properly aligned before applying pressure.
- Page 13 Model # XLGTD52-7K Assembly Instructions 14. Position the assembled console in the desired location against a wall. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to mount the Tipping Restraint Hardware Kit to one Wood Back Support (F) and the wall. NOTE: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL, TO PREVENT TIPPING CAUSING ACCIDENTS AND/OR INJURIES.
- Page 14 Model # XLGTD52-7K A s s e m b l y I n s t r u c t i o n s f o r F l o a t i n g S w i v e l M o u n t 16.
- Page 15 Model # XLGTD52-7K Assembly Instructions 17. The Sensor/Sound Shelf (N) provides two options: positioned above the TV or below the TV. Depending on the option you prefer, slide the SSS Spine (M) onto the Mounting Frame (K) properly. Adjust the height of SSS Spine so that it will be the correct distance above or below your TV and attach it in place using the ½...
- Page 16 Model # XLGTD52-7K Assembly Instructions 18. Hold and attach the flat side of the Mounting Frame (K) onto the Swiveling Bracket (J). Make sure the recess holes on the Mounting Frame are at the bottom. Securely tighten with the enclosed Allen Wrench. 1/2”...
- Page 17 Model # XLGTD52-7K Assembly Instructions 19. Pick up the Sensor/Sound Shelf (N) and securely fit the back tabs into the small slots of the SSS Spine (M). Tighten both lock bolts which are pre-attached on the SSS Spine with a Phillips screwdriver until they hit the back tabs of the Sensor/Sound Shelf.
- Page 18 Model # XLGTD52-7K Mounting Monitor Bracket to a television with a flat back Note: For televisions with a curved back or recessed back, proceed directly to next page. 20. Determine the correct diameter of the bolt your TV requires by hand threading them into the threaded inserts on the back of the TV.
- Page 19 Model # XLGTD52-7K Mounting Monitor Bracket to a television with a curved / recess back 22. Determine the correct diameter of the bolt your TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If you are unable to find the correct bolt consult a local hardware store.
- Page 20 Model # XLGTD52-7K Assembly Instructions MAKE SURE ALL BOLTS ARE TIGHT AND THE FLOATER POST IS AT A 90 DEGREE ANGLE. USE A QUALITY LEVEL TO VERIFY THE MOUNTING FRAME IS LEVEL PRIOR TO INSTALLATION OF TV. 24. Once the Monitor Brackets (L) are attached onto the back of television, ask for assistance to lift the television up to attach the Monitor Brackets onto the Mounting Frame (K).
- Page 21 Model # XLGTD52-7K Assembly Instructions 26. Repeat steps 8 through 11 to attach the Gaming Guitar Clip (O), Cable Wheel (P) and install Glass Top (G) and Glass Shelf (H) into place. 27. Carefully move the console and position it at the desired location against a wall. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware Kit to mount the tipping restraint to the Swiveling Floater Post (I) and the wall.
- Page 22 Model # XLGTD52-7K The following steps are only for those who wish to mount their TV directly to the wall. If you have already mounted your TV to the Swinging Floater or plan to display your TV on the top surface of the stand, disregard the following steps.
- Page 23 Model # XLGTD52-7K Assembly Instruction for installing the Mounting Frame onto a BRICK, SOLID CONCRETE OR CONCRETE BLOCK WALL NOTE: If you are mounting your TV to a wall with wood studs, skip this section. This assembly requires an electric drill and level (not included). 32.
- Page 24 Model # XLGTD52-7K Assembly Instructions 35. The Sensor/Sound Shelf (N) provides two options: positioned above the TV or below the TV. Depending on the option you prefer, slide the SSS Spine (M) onto the Mounting Frame (K) properly. Adjust the height of SSS Spine so that it will be the correct distance above or below your TV and attach it in place using the ½...
-
Page 25: Care And Maintenance
Should this product be defective in workmanship or materials, or fail under normal use, we will ® repair or replace it for up to one (1) year from date of purchase. Every VAS product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
Need help?
Do you have a question about the 3-N-1 Gaming Theater and is the answer not in the manual?
Questions and answers