Advertisement
Quick Links
TM
54" 3-in-1
Model # XLMEC54-LR
U.S. Patents 8,079,311 & 8,191,485
This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your
needs. DO NOT discard any of the hardware or parts that you will not use on your chosen option.
This will allow you to use this TV Console in different configurations at a later date, if desired.
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
Or visit our website 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
®
VAS
Console
www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
Date 2014-08-14 Rev. 1 Factory: FOCIDI
TV
1-866-942-5362
Page 1
LOT NUMBER:
DATE PURCHASED: /
TV
Factory No. 10944
/
Advertisement
Related Manuals for VAS XLMEC54-LR
Summary of Contents for VAS XLMEC54-LR
- Page 1 DATE PURCHASED: / 54" 3-in-1 Console Model # XLMEC54-LR U.S. Patents 8,079,311 & 8,191,485 This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT discard any of the hardware or parts that you will not use on your chosen option.
- Page 2 Model # XLMEC54-LR M A X I M U M R E C O M M E N D E D W E I G H T L O A D S ® MANUFACTURER: VAS CATALOG: 54" 3-in-1 Console (XLMEC54-LR)
- Page 3 Model # XLMEC54-LR Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Top Shelf Frame (1) B- Middle Shelf Frame (1) C- Bottom Shelf Frame (1)
- Page 4 Model # XLMEC54-LR Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. (1) Suction Cup (2) 1/2” Bolt (3) 3/4” Bolt (4) 1-1/4” Bolt (5) Lock Washer...
- Page 5 Model # XLMEC54-LR Assembly Instructions D/D1 D/D1 Flat Washer 3/4” Bolt 1-1/4” Bolt Lock Washer (6 used in this step) (2 used in this step) (4 used in this step) (6 used in this step) ③ ⑥ ⑤ ④ NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts.
- Page 6 Model # XLMEC54-LR Assembly Instructions Flat Washer 3/4” Bolt 1-1/4” Bolt Lock Washer (10 used in this step) (6 used in this step) (4 used in this step) (10 used in this step) ③ ⑥ ⑤ ④ 4. Stand the unit upright.
- Page 7 Model # XLMEC54-LR Assembly Instructions 8. Go back and tighten all bolts with the provided Allen wrench. 9. In case of uneven floor, Floor Levelers are provided at the bottom of both Legs (E and F). Simply tilt the unit back and raise or lower Floor Leveler by hand to correct tilting, as shown above.
- Page 8 Model # XLMEC54-LR Assembly Instructions for Table-top Console 3/4” Bolt (4 used in this step) ③ 10. Attach 2 Cable Wheels (M) to the backside of the Short Spine (D1) with the 3/4” Bolts (3). Tighten the bolts with the provided Allen Wrench.
- Page 9 Model # XLMEC54-LR Assembly Instructions for Table-top Console Suction Cup (24 used in this step) ① 12. Put the Suction Cups (1) firmly into top holes and inside corner plates on 3 Shelf Frames (A, B and C), as shown.
- Page 10 Model # XLMEC54-LR Assembly Instructions for Table-top Tools required: Allen wrench (provided), Phillips screwdriver, Mallet, Power Drill, and 3/8” Drill Bit. 14. Position the assembled console at the desired location against a wall. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to mount the tipping restraint to the Spine and the wall.
- Page 11 Model # XLMEC54-LR A s s e m b l y I n s t r u c t i o n s f o r F l o a t i n g S w i v e l M o u n t...
- Page 12 Model # XLMEC54-LR Mounting Monitor Brackets to a Television with a Flat Back NOTE: For televisions with a curved or recessed back, proceed directly to next page. 17. Determine the correct diameter of the bolt the TV requires by hand threading them into the threaded insert on the back of the TV.
- Page 13 Model # XLMEC54-LR Mounting the Monitor Brackets to a Television with a Curved/Recess Back 19. Determine the correct diameter of the bolt the TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If you are unable to find the correct bolt consult a local hardware store.
- Page 14 Model # XLMEC54-LR Assembly Instructions for Floating Swivel Mount MAKE SURE ALL BOLTS ARE TIGHT AND THE SPINE IS AT A 90 DEGREE ANGLE AND VERIFY THE MOUNTING FRAME IS LEVEL, USING A QUALITY LEVEL, PRIOR TO INSTALLATION OF TV.
- Page 15 Model # XLMEC54-LR Assembly Instructions for Floating Swivel Mount Tools required: Allen Wrench (provided), Phillips screwdriver, Mallet, Power Drill, and 3/8” Drill Bit. 23. Repeat steps 10 through 13 to attach the Cable Wheels (L) and install the Top Glass (G) and Glass Shelves (H and I) in place.
- Page 16 Model # XLMEC54-LR The following steps are only for those who wish to mount their TV directly to the wall. If you have already mounted your TV to the Swinging Floater or plan to display your TV on the top surface of the stand, disregard the following steps.
- Page 17 Model # XLMEC54-LR Assembly Instruction for installing the Mounting Frame onto a BRICK, SOLID CONCRETE OR CONCRETE BLOCK WALL 2.50" (63 mm) Maximum weight 135 lb. (61.2 kg) Concrete Anchors should only be used for masonry mounting. NEVER use the wall anchors to mount the unit to drywall.
- Page 18 Model # XLMEC54-LR Assembly Instructions 32. Attach the Monitor Brackets (L) to the back of the television following steps 17 & 18, or 19 & 20, depending on the type of TV that you own. 33. Ask for assistance to lift the television up to attach the Monitor Brackets (L) onto the Mounting Frame (K).
-
Page 19: Care And Maintenance
Should this product be defective in workmanship or materials or fail under normal use, we ® will repair or replace it for up to one (1) year from date of purchase. Every VAS product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
Need help?
Do you have a question about the XLMEC54-LR and is the answer not in the manual?
Questions and answers