Advertisement
Quick Links
30-inch Audio/Video Tower
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if you are missing parts, do not return this item to
the Retailer Store. Please call our toll free customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
1-866-942-5362 8:30 a.m. - 4:30 p.m. PST, Monday - Friday
ONLINE: www.whalenfurniture.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
VAS Furniture Mfg. Inc.
Video Instruction Guides
Go to http://whalen.showuhow.com to view step-by-step instructional
videos for assembling and installing your product. Enter the following
product number on the ShowUhow homepage.
PRO9005GB
Factory No. 33-10944
LOT No.:
DATE OF PURCHASE:
EMAIL: parts@whalenfurniture.com
Model # PRO9005GB
Page 1
Advertisement
Related Manuals for VAS PRO9005GB
Summary of Contents for VAS PRO9005GB
- Page 1 Model # PRO9005GB LOT No.: DATE OF PURCHASE: 30-inch Audio/Video Tower ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if you are missing parts, do not return this item to the Retailer Store. Please call our toll free customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 8:30 a.m.
-
Page 2: Quality Guarantee
Model # PRO9005GB QUALITY GUARANTEE We are confident that you will be delighted with your VAS Furniture purchase. Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to 1 year from date of purchase. -
Page 3: Care And Maintenance
Model # PRO9005GB Furniture Tipping Restraint Young children may be injured by tipping furniture and the use of a tipping restraint is highly recommended. This hardware, when properly installed, could provide protection against the unexpected tipping of furniture due to improper use. - Page 4 Model # PRO9005GB Parts & Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A- To p Shelf Frame (1) B- Second Shelf Frame (1) C- Large Shelf Frame (1)
- Page 5 Model # PRO9005GB Parts & Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. M- Front Left Support (2) N- Front Right Support (2) O- Back Left Support (2) P- Back Right Support (2) (1)- 2 1/8”...
- Page 6 Model # PRO9005GB Assembly Instructions Note: Please do not fully tighten all bolts until you finish assembling all parts, then go back and fully tighten all bolts, this will make it easier during assembly of unit. 1. Unpack the unit and confirm that you have all the hardware and required parts listed.
- Page 7 Model # PRO9005GB Assembly Instructions 4. Locate the assembled Spine and set back face down on a scratch free surface as shown in detail #2. 5. Align and attach Top Shelf Frame (A) to the top of the Spine, using the 5/8” Bolts (3) with Lock Washer &...
- Page 8 Model # PRO9005GB Assembly Instructions 7. Flip over last assembly. 8. Align and attach the lower 3 Shelf Frames to Front Panel (L). Insert and screw six 5/8” Bolts (3) with Washer (4 & 5) through the end bracket holes and one 1 1/4″Bolt (2) with Washers (4 &...
- Page 9 Model # PRO9005GB Assembly Instructions 10. Turn the unit upright. 11. Attach the Front Left & Front Right Supports (M & N) in place to connect the Shelf Frames (C & D) with Front Panel (L) using the 5/8” Bolts (3) with Washers (4 & 5), as shown in detail 12.
- Page 10 Model # PRO9005GB Assembly Instructions 13. Put Suction Cups (6) into top holes of all Shelf Frames in place as shown in detail #5. 14. Place the Top Glass and Glass Shelves (H, I, J & K) in place, make sure the glasses are center and the cut edges point towards back.
- Page 11 Model # PRO9005GB Assembly Instructions 16. In case of uneven floor, simply tilt the unit back and use your hand to turn the Floor Levelers attached at the bottom of Bottom Shelf Frame (E) to correct tilting, until the unit is level. As shown in detail #6.