Advertisement
8
RayClic-PC, RayClic-PS, RayClic-PT Installation Instructions
Heating Cable Circuit Testing
The RayClic Power Connection Kits (RayClic-PC, RayClic-PS and RayClic-PT) now include test ports in the blank module. Voltage can measured at
these points to confirm continuity or power to the installed heating cable circuit. For detail heating cable operation refer to the appropriate installation
and operating manual.
Instructions:
1. Open the RayClic Cover.
2. Set multimeter to AC voltage function.
3. Insert multimeter test probes into the two test ports.
WARNING: To avoid shock do not cross the test
probes or touch them to the metal pressure plate when
measuring voltage.
Worldwide Headquarters
Tyco Thermal Controls
7433 Harwin Drive
Houston, TX 77036
USA
Tel: 800-545-6258
Tel: 650-216-1526
Fax: 800-527-5703
Fax: 650-464-7711
info@tycothermal.com
www.tycothermal.com
Test
ports
Canada
Tyco Thermal Controls
250 West St.
Trenton, Ontario
Canada K8V 5S2
Tel: 800-545-6258
Fax: 800-527-5703
Tyco, HWAT, IceStop, RayClic, and XL-Trace are registered and/or unregistered trademarks
of Tyco Thermal Controls LLC or its affiliates.
TORX is a registered trademark of Textron., Inc.
Important: All information, including illustrations, is believed to be reliable. Users, however,
should independently evaluate the suitability of each product for their particular application.
Tyco Thermal Controls makes no warranties as to the accuracy or completeness of the
information, and disclaims any liability regarding its use. Tyco Thermal Controls' only obli-
gations are those in the Tyco Thermal Controls Standard Terms and Conditions of Sale for
this product, and in no case will Tyco Thermal Controls or its distributors be liable for any
incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse
of the product. Specifications are subject to change without notice. In addition, Tyco Thermal
Controls reserves the right to make changes—without notification to Buyer—to processing
or materials that do not affect compliance with any applicable specification.
Advertisement
