Z-150.6 Ii Input And Controls - zapco Z-150.4 II Owner's Manual

The Z-150.6 II is the 4-Channel amp and it also has the same basic controls and
features as the other amps but has been adapted for 6-channel use.
• The channels 1/2 do not have a low-pass filter as they will be used either full
range or for mids/highs so there is only high pass here
• Channels 3/4 have high pass, full range, and low pass positions so they can be
used for highs, or they can be band-passed for mid-range use
• Channels 5/6 do not have a crossover function switch as they are band pass
only. They can be used a the bass section with the low-pass and a variable sub
sonic. The sub sonic (which is high-pass), however has a wide frequency range
so it can be used as the bottom of a band-pass to drive mid-bass drivers, if you
have a separate sub amp
• The input mode switch lets you use 2Ch, 4Ch,of 6Ch of input, so you can
drive all the channels from a single 2Ch stereo output from a head unit
1• Ch1/2 and Ch3/4 RCA Inputs
2• Ch1/2 and Ch3/4 variable gain controls
3• Ch1/2 and Ch3/4 HPF frequency controls
4• Ch1/2 and 3/4 crossover mode switches
5• Ch3/4 LPF frequency control
6• Input mode for 2Ch, 4Ch, or 6Ch inputs
* See explanations of common functions on the previous sections
Z-150.6 II Input Ends
1 2 3
4 11 9 10
5 6
7• Port for optional dash remote
8• Ch5/6 RCA inputs
9• Ch5/6 Sub sonic (HP) frequency control
10• Ch5/6 LP bass crossover frequency control
11• Variable bass boost control
12• Ch5/6 variable gain control
13• Power and protect LEDs
12 13
7 8
11