Z-150.4 Ii Input And Controls - zapco Z-150.4 II Owner's Manual

The Z-150.4 II is the 4-Channel amp and has the same basic controls and features as
the 2-Channel amps but adapted for 4-channel use.
• The front channels do not have a low pass filter as they will be used either full
range or for mids/highs or even tweeters
• The rear channels have exactly the same controls as the 2-Channel amps as
the rears will be used as full-range or bass, depending on the application, or
even band-pass if the amp is used for tweeters (Ch1/2) and mid-range's (Ch3/4)
• The Z-150.4 II adds a 2Ch/4Ch switch so you can choose to have only the
Ch1/2 inputs feed both front and rear
1
1• Front (Ch1/2) RCA inputs
2• Rear (Ch2/4) RCA inputs
3• Front and rear variable gain controls
4• Front (Ch1/2) Multiplier and HPF
frequency control*
5• Crossover mode select (Clone position
makes both front and rear crossovers identical)
6• Rear (Ch3/4) HPF frequency control
* See explanations of these functions on the previous section 2-Channel amps
10
Z-150.4 II Input Ends
4
2 3 6
5 10
7 8
7• Rear crossover mode switch*
8• Rear (Ch3/4) Multiplier and LPF frequency
control*
9• Variable Bass boost control
10• Port for optional dash mount bass gain
control
11• Auxiliary pass-through RCA output*
12• Power and Protect LEDs
12
9 11