Eaton MTL5501-SR Instruction Manual page 31

MTL5510B modes
The following logic and timing diagrams are provided to assist the user in understanding the behaviour of the MTL5510B module
when a specific mode is chosen.
The open switch ( ) and closed switch (
D and then the output conditions of o/p 1, 2, 3 or 4. Note that in certain modes a Line Fault can cause an override of the output.
Mode 1: 2 ch, each ch 1 input 2 outputs
i/p - Ch A
o/p 1
- -
o/p 2
o/p 3
- -
o/p 4
Mode 2: As mode 1 with all outputs phase reversed
i/p - Ch A
o/p 1
- -
o/p 2
o/p 3
- -
o/p 4
Mode 4: 1 ch with line fault output
i/p - Ch A
No Line No
fault fault fault
o/p 1
No Line No
fault fault fault
o/p 3
Mode 6: 1 ch with start/stop latch
i/p Ch C
Non-latching
i/p Ch B
Enable
i/p Ch A
o/p 1
o/p 2
o/p 3
o/p 4
i/p Ch A
Non-latching
i/p Ch B
Ch C open
o/p 1&3
o/p 2&4
INM 5500 Rev 10
) symbols are used to represent both the input conditions of Ch A, Ch B, Ch C or Ch
How to use these mode tables - examples
i/p - Ch C
The logic tables for Mode 1 represent Ch A controlling outputs 1
& 3, while Ch C controls outputs 2 & 4.
Output 1 & 3 are shown following input Ch A (open or closed)
- -
while Outputs 2 & 4 follow input Ch C.
Mode 2 however shows o/p 1, 2, 3 and 4 being in antiphase
to their inputs.
- -
Mode 9 operates with both outputs for each channel being
in antiphase to their inputs.
Mode 3: 2 ch, 2 pole c/o output
i/p - Ch C
- - o/p 1
o/p 2
- -
Mode 5: As mode 4 with c/o outputs
Line
fault
o/p 1
o/p 2
Line
fault
LFD o/p 3
LFD o/p 4
i/p Ch C
i/p Ch A
i/p Ch B No effect
o/p 1
OR
o/p 2
o/p 3
o/p 4
Latching
(enable)
Ch C closed
i/p - Ch A i/p - Ch C
-
-
- -
o/p 3
- -
o/p 4
i/p - Ch A
No Line No
fault fault fault
No Line No
fault fault fault
Latching
Start
Reset
Stop
A
Start
i/p Ch A
i/p Ch B
o/p 1&3
o/p 2&4
* i/p Ch A can be open or closed when i/p Ch B opens to stop latch
*
i/p Ch A can be open or closed when i/p Ch B opens to stop latch
-
-
Line
fault
Line
fault
Mode 7: As mode 2 with LFD enabled
i/p - Ch A
No Line
fault fault fault
o/p 1
o/p 3
i/p - Ch C
o/p 2
o/p 4
B BRes
Stop et
*
No Line
fault
23