Setting The Program Mode - FPI FireGenie Installation & Operating Instructions Manual

The user can program two On-Times and two Off-Times as well as the Temperature settings for each day of
the week. The PROG button is used to initiate the programming mode. The "+" and "-" buttons are used to
adjust the time and temperature settings.
Note: The remote needs to be ON in order to set the Programs.
Follow the steps below to set the programs:
1) Programming the On-Time of Time Period 1
Press and hold the PROG button for 2 seconds or more to initiate the Programming mode.
The symbol "PROG 1" will flash to indicate the Remote is in Programming mode.
The On-Time for Time Period 1 will also flash. The "+" and "-" buttons can be used to adjust this time
setting.
The LCD will show the current setting in Time Period 1 for Monday:
8

SETTING THE PROGRAM MODE

Programming of Time Period 1
Time Period 1 On-Time
FPI FireGenie TM Remote Control Manual