Setting The Program Mode - FPI FireWizard Operating Instructions Manual

It is recommended to unplug the unit while setting the programs.
In this mode, the user can program two On-Times and two Off-Times as well as the
Temperature settings for each day of the week. The PROG button is used to initiate the
programming mode. The "+" and "-" buttons are used to adjust the time and temperature
settings.
Note: The remote needs to be ON in order to set the Programs.
Follow the steps below to set the programs:
1) Programming the On-Time of Program 1
Press and hold the PROG button for 2 seconds or more to initiate the
Programming mode.
The symbol "PROG 1" will flash to indicate the Remote is in Programming mode.
The On-Time for Program 1 will also flash. The "+" and "-" buttons can be used
to adjust this time setting.
The LCD will show the current setting in Program 1 for Monday:
FPI FireWizard Remote Control Manual
TM

SETTING THE PROGRAM MODE

Programming of Program 1
Program 1 On-Time
Page 13