How To Set Up The Urc-9040 To Control Your Devices - One for All URC-9040 Instruction Manual

How to set up the URC-9040 to control your Devices

Example: To set up the URC-9040 for your Television (on the TV key):
1.
2.
3.
4.
_ _ _ _ _
5.
6. Turn your device back on and try all the remote's functions to ensure
they are working properly. If the functions do not work properly,
repeat steps 1-5 using another code listed under your brand.
7. If your device does not respond, follow steps 1 to 5 with each
code listed for your brand. If none of the codes listed for your
brand operate your device, or if your brand is not listed at all,
try the Search Method described on page 8.
- Most TV's do not switch on pressing the POWER key. Please try pressing a "number" key
or the "TV-text off" key to switch your TV back on.
- If your device's original remote control does not have a POWER key, press PLAY instead of
POWER when setting up your device.
- Some codes are quite similar. If your device does not respond or is not functioning properly
with one of the codes, try another code listed under your brand.
- Remember to press the corresponding device key before operating your device.
The TV, STB and AUDIO keys are not mode specific. So it is possible to
set up a second Television on the STB key (If you do not have a Set-Top-Box)
or a second satellite receiver on the AUDIO key for example.
Exception is the PC key. The PC key is a dedicated mode key that cannot be
used for any other device than a PC.
WWW.ONEFORALL.COM
Setting up the URC-9040
Find the code for your device in the Code list. Codes are listed
by device type and brand name. The most popular code is listed first.
Make sure your device is switched on (not on standby).
Press and release the TV key on the URC-9040.
Press and hold down REWIND + FASTFORWARD
simultaneously until the URC-9040's LED (red light)
blinks twice (the LED will blink once and then twice).
Enter your five-digit device code using the number keys.
The LED will blink twice.
Now, aim the URC-9040 at your device and press POWER. If your device
switches off, the URC-9040 is ready to operate your device.
7