Setting Up The Kameleon 6; (How To Set Up The Kameleon 6 To Control Your Devices); Direct Code Set Up; Quick Code Reference - One for All KAMELEON 6 Manual

Hide thumbs Also See for KAMELEON 6:

User manual & code book (38 pages)

Table of Contents

(How to set up the KAMELEON 6 to control your devices)

Example: To set up the KAMELEON 6 for your television:

Find your device code in the code section (page 113 – 126). Codes are listed by device mode and brand name.

The most popular code for each brand is listed first.

Make sure your television is switched on (not on standby).

Press and release the TV key on your KAMELEON 6.

Press and hold down the MAGIC key (for about 3 seconds) until the rabbit comes out of the hat.

_ _ _ _

Enter your four-digit code using the number keys. The bottom part of the animated IR Indicator will blink twice.

Now, aim your KAMELEON 6 at your television and press POWER. If your television switches off, your KAMELEON 6 should be ready

to control your television.

Most TV's do not switch back on pressing the POWER key, please try pressing a "number" key or the "TV-text off" key to switch your TV back on

(you can use the SCROLL key to access this function).

If your device does not respond, follow steps 1 through 6 with each code listed for your brand. If none of the codes listed for your brand operate

your device, then try the Search Method described on page 7, even if your brand is not listed at all.

Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under

your brand.

If the original remote control from your Video Recorder did not have a POWER key, press PLAY instead of POWER during step 6.

To set up your other devices, follow the same instructions above, only press the appropriate device key during step 3.

Remember to press the correct device key before operating your device. Only one device (CD, amplifier, cassette etc.) can be assigned to a device

key. If your original remote operates more than one device (for example; a receiver, CD player and cassette player in one remote), you need to set

up each device separately.

Devices (code groups) can be set-up on the following (Mode) keys:

To set up a second TV, VCR, SAT, CD, AUD or DVD (See page 10).

Write down the codes for your devices in the boxes below for quick and easy reference.

.... ..........................................

. ................................................

..........................................