One for All URC-9040 Instruction Manual page 7

19.
20.
21. Teletext Keys
After pressing the TV key, the transport keys (REW, PLAY, PAUSE, FF) are used
to operate the main Teletext functions. The symbols below the keys are for Teletext.
The text keys are used to access the Teletext functions of your
television. Of course, your television must have Teletext capability.
TEXT ON: Puts the television in the Teletext mode.
TEXT OFF: Switches the television back to regular viewing mode.
On some televisions, this may be done by pressing the TEXT ON key several times.
EXPAND: Shows the top half of the Teletext page in larger letters.
By pressing again, you can see the bottom half of the Teletext page enlarged.
To return to regular Teletext viewing, press the EXPAND key again,
or press the TEXT ON key, depending on your television.
HOLD/STOP: Stops changing pages.
MIX: Shows teletext and regular television simultaneously.
You may also use this key for subtitling. On some televisions
this function is accessed by pressing the text key twice.
16:9: This key provides you the (16:9) wide screen view
function (if available on your original remote).
WWW.ONEFORALL.COM
The Keypad
Red, Green Yellow and Blue
After pressing the TV key and accessing the text mode, the keys marked red,
green, yellow and blue, allow you to access the Fastext functions of your
television. If on your original remote control these keys are used for
Menu navigation, the URC-9040 Fastext keys may operate in the same
way. These keys are also available in the STB mode.
Transport keys
These keys operate the transport functions (PLAY, FF, REW etc.) of your device.
5