Hide thumbs Also See for Lock 500:

Advertisement

1

Matching the Lock with the Key

1.
Connect the operating voltage of 12-48 V DC to the Lock and wait for 1 minute. In case you have
a product version with Power Source kit, use the conversion cable. It converts the AC adapter's
coaxial connector output to stripped wires that are needed to power the Lock 500. Follow the polarity
symbols in the front panel. Use + and - terminals to power the device.
2.
Insert the Key into the USB port of the Lock. When the LED on the Key turns off, (after approx.
10 seconds) the matching is complete, and you can remove the Key from the USB port.
3.
Go to
2a
networks (Lock 500i only). If deploying Locks as DHCP client into existing networks, please see
the TOSIBOX

Deploying into Broadband Networks

2a
PC
®
TOSIBOX
Mobile
Client
1.
Connect an Internet-connected ethernet cable
to the Lock's WAN port.
2.
Plug the devices into the Lock's LAN ports (LAN
1-3). If the devices have static IP addresses,
please see
user manual.
Lock 500/500i

Quick Start Guide

Copyright © Tosibox Oy, 2018
TOSIBOX
Lock 500/500i
®
Power source Kit
(optional)
if deploying into broadband networks (ethernet) or
user manual.
®
VPN tunnel through Internet
®
TOSIBOX
Key
Deploying the Lock
in the TOSIBOX
WAN: Internet/xDSL router
USB Connection
2b
if deploying into mobile
W
®
TOSIBOX
A
Lock
N
Firewall
®
TOSIBOX
®
Key
HMI
PLC
L
A
N
Camera
PC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lock 500 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tosibox Lock 500

  • Page 1: Quick Start Guide

    Power Source kit, use the conversion cable. It converts the AC adapter’s coaxial connector output to stripped wires that are needed to power the Lock 500. Follow the polarity symbols in the front panel. Use + and - terminals to power the device.
  • Page 2: Declaration Of Conformity

    The Lock is not connected to the Internet. Declaration of Conformity Hereby, Tosibox Oy declares that the radio equipment type Lock 500 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.tosibox.com/product/lock-500/EU-DoC...

This manual is also suitable for:

Lock 500i

Table of Contents