Table Of Contents; Tools Required - banks Derringer 66571 Installation Instructions Manual

TOOLS REQUIRED:

• Metric sockets and wrenches
• Hooked Pick
• Diagonal (side cutter) Pliers
• Exacto knife or other
small bladed knife
• Drill motor*
• #31 (.1200 dia.) Drill bit*
• #1 or 7/32 (.228 dia.) Drill bit*
*
Required only if mounting switch in dash
Highly recommended
tools and supplies:
• Standard and Phillips screwdrivers
• Silicon sealer (black or
clear recommended)
• Metal coat hanger

Table of Contents

Section 1 ...................................... 10
Installation of wiring Harness,
Connections and Derringer Tuner
Section 2 ...................................... 22
Operation of the Derringer
Section 3 ...................................... 24
Troubleshooting
Section 4 ...................................... 27
Placement of the Banks Power Decals
3
97282 v.3.0