Installation Of Wiring Harness, Connections And Tuner - banks Derringer 66571 Installation Instructions Manual

Section 1
INSTALLATION OF WIRING HARNESS, CONNECTIONS & DERRINGER
TUNER
1.
Disconnect the battery ground
cables from each battery (if so
equipped). Secure the cables so that
they do not come in contact with the
battery posts during the installation.
2.
Remove the engine cover for:
a. The Ram 1500, by first
removing the oil filler cap.
Then, lift up at the front to
release the rubber socket
mounts and pull forward to
release from rear mounts.
Figure 1
Figure 2
10
97282 v.3.0
Reinstall oil filler cap.
See Figure 1.
b. The Jeep Grand Cherokee,
by lifting up at each corner
to release the rubber
socket mounts.
See Figure 2.
If installing in a Jeep
Grand Cherokee, skip steps 3 and 4
and proceed to step 5.
Ram 1500
Grand Cherokee