Table of Contents
Advertisement
Section 2
OPERATION OF THE DERRINGER MODULE, CONTINUED
Power Added %:
If connected to an iDash 1.8 and on the
"Derringer" layout, the vertical bar graph
on the right hand side represents in real
time how much power the Derringer is
adding. See figure (Figure 26 ) In stock
mode there will be no change to the
bar graph and in Level 6 the bar graph
will reach 100% under proper operating
conditions. % power added is effected by
safety features such as Engine Coolant
Temperature, Exhaust Gas Temperature
and other parameters so it might not
always fully reach 100%. The Power
Added data can also be displayed on ANY
layout as a numeric value by selecting it
from the "Derringer" category of data.
Figure 26
23
97282 v.3.0
Advertisement
Table of Contents
