Table of Contents
Advertisement
1-1.
Unpacking
Before unpacking, make sure the carton configuration have no damaged, broken or parts
extruded, if found above defect case, contact to your retailer for change a new one as soon as
possible.
Unpacking procedure:
1. Carefully open the carton. (Pull it from the bottom to the top)
2. Take out and read the manual, check parts list and relative ancillary.
3. Inspect the machine outline if it is in normal condition or not. Crack, rust, collapse and separated
are strictly prohibited.
4. Cleaning the surface of the machine.
5. Assembly the drill machine base on manual, instruction guide.
1-2.
Transportation instruction
1. Please refer to instruction manual in specification and machine weight to arrange handling
manner. Be sure to use capable fork – lifter or hoist to lift of machine.
2. The handling and transportation shall be carried out by qualified persons.
3. Fork – lift or hoist can be used in handling and shall be operated by qualified driver.
4. While transportation, keep attention to the balance of machine.
5. During handling, the machine shall be lifted only in vertical direction.
6. Before handling, make sure all movable parts are secured in their position and all movable
accessories should be removed from machine.
7. The steel rope should average pull the machine head, table and column tightly.
8. Keep all the process in a carefully and slightly condition.
9. Bump or crash are strictly prohibited. It will cause precision shift and electronic controller
damaged.
:
:
1
Advertisement
Table of Contents
