Sensors Due For Calibration; Bump Test Due - BW Technologies Quattro Technical Reference Manual

Sensors Due for Calibration

If calibration is due, the following screen displays.
for each sensor that is due for calibration.
Press C to acknowledge that calibration is due. If Force Cali-
bration is disabled, the detector enters normal operation.
If the Force Calibration option is enabled, the following
screen displays.
flashes
The sensor(s) must be calibrated to enter normal operation.
Press and hold C to enter calibration and refer to
Procedures, or press C and release to deactivate the detector.
BW Technologies by Honeywell recommends that the sensors
be calibrated at least once every 180 days (6 months).

Bump Test Due

7. The next bump test due date for each sensor displays.
GasAlertQuattro
Startup Sequence
Calibration
Note
15