Calibration Due Date (Optional); Force Calibration Enabled (Optional) - BW Technologies GasAlertMax XT II Technical Reference Manual

1, 2, 3, and 4-gas detector

Table of Contents

GasAlertMax XT II

Technical Reference Guide

Calibration Due Date (optional)

9. The LCD displays the number of days remaining until the

next calibration is due.

If the Calibration Interval field is set to 0 in Fleet Manager II, it

disables the calibration due date function and this test is

bypassed. Refer to

Calibration Interval

If any sensor is past the cal bration due date, the detector

beeps, flashes, and vibrates while the LCD displays the

following screen.

Press C to acknowledge the warning. If C is not

pressed within 2 minutes, the detector automatically

deactivates.

Note

in the User Options.

10. If the Force Calibration option is enabled in Fleet

Manager II and a sensor is past due, the sensor(s) must

be calibrated to continue and enter normal operation.

Press C to acknowledge. Refer to

to begin calibration. If C is not pressed to enter calibra-

tion within 2 minutes, the detector automatically deacti-

vates.

Calibration Procedure

Table of Contents