Table of Contents
Advertisement
5. MS-DOS Driver Installation
5
The first screen sets the installation drive and directory that the ASPI
driver will be installed on. Follow the on-screen directions and/or op-
tions to continue the installation.
6
To activate the device driver, reboot the system by selecting the Re-
boot Now option at the end of the installation process.
ASPI Manager Command Line Options
Below is a list of command line options. The ASUS ASPI Manager, ASPIA100,
supports command line switches to optimize driver operation. From inside the
CONFIG.SYS file for MS-DOS, use the following format when modifying
the device driver switches:
The standard format for command line switches is:
Device = C:\INIASPI\ASPIA100.SYS [Driver Config Option]
/D
Verbose Mode provides detailed information about the driver on
system command line when the driver is initialized.
/L
Driver scan eight LUNs for each SCSI Target.
/Bb,dd
Scan device only on PCI BUS #b, PCI DEVICE #dd
The range for "b" is from 0 to 7.
The range for "dd" is from 0 to 20.
/Bb
Scan all the devices on the PCI BUS #b
The range for "b" is from 0 to 7.
/Sdd
Scan device only on the PCI BUS #0 and device #dd
The range for "dd" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/O that driver sup-
ports. The range for "x" is from 1 to 16.
30
ASUS PCI-SIU2 User's Manual
Advertisement
Table of Contents
