Table of Contents
Advertisement
12. SCO UnixWare Driver Installation
Installing the ASUS driver in a new UnixWare
Drivers for the host adapter may be found on the PCI-SIU2 DRIVER DISK 2.
In most cases you will load the drivers during a new installation of UnixWare
from CD-ROM. The driver is loaded during the early stages of the installation
procedure. The UnixWare installation program will prompt you for the re-
quired parameters as the installation procedure progresses. It is highly recom-
mended that you have a copy of the SCO UnixWare Installation Handbook and
SCO UnixWare System Owner Handbook for reference.
1
Insert the "SCO UNIXWARE INSTALLATION DISKETTE" into the
floppy drive and turn on the computer. Follow the on-screen installa-
tion instructions.
2
When prompted to INSTALL HOST BUS ADAPTER DRIVERS,
insert the PCI-SIU2 DRIVER DISK 2 into drive A: press <Enter>.
3
When prompted to INSTALL ANOTHER HBA DISKETTE, press
<ENTER> to continue.
4
Follow the directions on screen until you come to a window titled: Load-
ing ASUS PCI-SIU2 Host Adapter.
• Select CONTINUE INSTALLATION.
• Select CONTINUE INSTALLATION again.
5
This completes loading the host adapter driver. Follow the on-screen
directions to complete the SCO UnixWare installation. For further in-
formation regarding UnixWare installation, refer to the SCO UnixWare
Installation Handbook.
72
ASUS PCI-SIU2 User's Manual
Advertisement
Table of Contents
