Table of Contents
Advertisement
8. Microsoft Windows NT Driver Installation
Adding/updating ASUS driver to existing Win NT:
For computer systems using other SCSI host adapters or an IDE drive to pro-
vide the system boot routine, these instructions will guide you through the
PCI-SIU2 host adapter driver installation. The Windows NT driver will be
found on the PCI-SIU2 DRIVER DISK 1. It is important that the SCSI bus
hardware and Windows NT are installed and configured before proceeding
further.
1
Once a Windows NT session is established, use your installed mouse
or the appropriate key strokes to select MY COMPUTER from the
Main Desktop. Execute the following steps:
•
Select CONTROL PANEL from within the MY COMPUTER
group
•
Select SCSI ADAPTERS from within the CONTROL PANEL
group.
2
Select the DRIVERS tab from within the SCSI ADAPTERS group.
•
In the DRIVERS window, select "ADD..."
3
In the INSTALL DRIVER window, select "HAVE DISK...".
4
In the INSTALL FROM DISK window that is displayed, enter the ASUS
Driver path name:
•
Insert PCI-SIU2 DRIVER DISK 1 into drive A:
•
Type: A:\WINNT, select "OK"
5
Select PCI SCSI Host Adapter, select "OK" to install the
INIA100.SYS driver onto your hard disk drive.
6
In the WINDOWS NT SETUP window that is displayed, enter the ASUS
Driver path name to continue:
•
Type: A:\WINNT, select "CONTINUE"
7
This completes updating the Host Adapter Driver. Follow the on-screen
directions to restart you computer and activate the new driver
8
It is highly recommended that you verify the ASUS PCI-SIU2 Win-
dows NT device driver has been properly installed by selecting MY
COMPUTER from the desktop. Then select CONTROL PANEL:
54
ASUS PCI-SIU2 User's Manual
Advertisement
Table of Contents
