Asus PCI-SIU2 User Manual page 19

3. Hardware Installation
4a Installation of internal SCSI devices
A total of 15 SCSI peripherals can be connected to the PCI-SIU2. One
internal 68-pin high density Ultra2 cable is included (see FIGURE 7).
This cable is used to connect internal target devices. The internal cable
is made with multiple connectors attached and used to daisy chain the
host adapters to two or more target devices. The connector on the host
adapter is keyed for proper orientation and insertion. Plug the long end
of the cable to the host adapter and the remaining connectors to the
target SCSI devices. It is important to use the cable with the termina-
tion on one end of the cable towards the target device side. The cable
is limited to a total lenghth of 12 meters including external cabling.
Installation of internal cable must be performed before replacing the
cover.
FIGURE 7 |
Self-terminating high-density 68-pin Ultra2 internal cable
(included, may vary in length and number of connectors)
FIGURE 8 | Connecting the 68-pin Ultra2 SCSI cable
ASUS PCI-SIU2 User's Manual 19