Solo To Center; Finish Solo - SPL SMC 7.1 User Manual

Solo To Center

• Press the button Solo To C. The button flashes red
awaiting a further selection (audio is muted).
All 7.1 Speaker buttons except the Center are
deactivated.
• Now press the corresponding 7.1 Speaker button
you wish to monitor on the center speaker. The but-
ton Solo To C stops flashing and the button of the
selected speaker flashes.
• To monitor another 7.1 Speaker on the Center
Speaker press the corresponding button.

Finish Solo

• Press the active Solo button. The Solo button no
longer lights up and the last active routing for the
chosen input will be restored.
Note: Solo functions are available only when a 7 .1 Input is active.
13
7.1 Inputs Stereo Inputs
1 2 1 2
L C R LFE
7.1 Speakers
E.g.: Solo To Center was activated.
7.1 Inputs Stereo Inputs
1 2 1 2
L C R LFE
7.1 Speakers
E.g.: The RB channel of 7.1 Input 1 is routed to 7.1 Center Speaker. All
other speakers are deactivated.
I F R
Solo
In Place To C Mono L/R Alt
LS RS LB RB
Solo
In Place To C Mono L/R Alt
LS RS LB RB
Solo
Mute
Mute