Troubleshooting - Hoover HandiVac 7.2 Instruction Book

Troubleshooting

Problems and solution
If you come across a problem, please use the checklist of troubleshooting tips before
ringing Hoover Customer Care.
Problem
Not charging - no power
when switched on.
Running time too short.
Typically, running time
is between 8-12mins
depending on model.
Weak suction.
Cause
The power on the
handheld vacuum must
be switched 'OFF' on
the handle, to enable
the vacuum to charge
effectively.
Rechargeable batteries
used, require a full
charge to operate to
their best performance.
Weak suction is often
caused by the dust bin
being full, or the filters
becoming blocked.
Solution
Ensure the charging base is
plugged securely into the
powerpoint and is switched 'ON' .
The charging light on the
HandiVac will illuminate if
correctly charging.
Charge for a minimum or
14 hours prior to first use.
For additional or normal charging
a minimum of 8 hours is required,
but an optimum charge of 14
hours will ensure a full charge, and
maximum operation time.
Remove and separate filter parts
and clean thoroughly.
Fully charge battery - see above.
Due to our program of continuous
product improvement and
innovation, sometimes the
product you buy may differ slightly
from the one shown on this
product carton.