Clas Ohlson 922265 Instruction Manual page 10

3. Hold down [ SET ] for 2 seconds and the hours will
begin to flash.
- Press [ UP ]/[ DOWN ] to set the hours.
4. Press [ SET ] and the minutes will begin to flash.
- Press [ UP ]/[ DOWN ] to set the minutes.
5. Press [ SET ] or wait for 15 seconds and the setting
will be saved.
• The alarm is now on and the alarm symbol will show
on the display.
• The alarm clock will emit a ring signal at the set time,
the signal will sound for 1 minute or until any of
the buttons on the back is pressed.
• The clock will sound the alarm at the same time every
day unless the alarm function is switched off.
• The alarm is switched off by pressing [ SET ] the required
number of times until the alarm time in question "A1",
"A2" or "A3" is displayed.
• Press [ UP ] to toggle between −− (off) and ON (on).
10