XR190CT-H ADDENDUM
• Install the bearing remover head into the bearing. From the opposite side, install the bearing remover shaft
and drive out the bearing from the wheel hub.
Bearing remover head, 15 mm: 07746-0050400
Bearing remover shaft: 07746-0050100
•
Drive in a new bearing squarely with its marked side facing outside until it is fully seated.
Driver: 07749-0010000
Attachment, 32 x 35 mm: 07746-0010100
Pilot, 15 mm: 07746-0040300
•
Install the distance collar.
•
Drive in a new bearing squarely with its marked side facing outside until it is seated on the distance collar.
Driver: 07749-0010000
Attachment, 32 x 35 mm: 07746-0010100
Pilot, 15 mm: 07746-0040300
• Wheel disassembly and inspection
5-20
20 N·m