C.1.3 Updating Firmware From Floppy Disk — Performing The Update - Compaq AlphaServer DS20 Service Manual

C.1.3 Updating Firmware from Floppy Disk — Performing the
Update
Insert an update diskette (see Section C.1.2) into the floppy drive. Start LFU and select
dva0 as the load device.
Example C–5 Updating Firmware from the Floppy Disk
***** Loadable Firmware Update Utility *****
Select firmware load device (cda0, dva0, ewa0), or
Press <return> to bypass loading and proceed to LFU: dva0
Please enter the name of the options firmware files list, or
Press <return> to use the default filename [AS1400IO,(AS1400CP)]: AS1400IO
Copying AS1400IO from DVA0 .
Copying TCREADME from DVA0 .
Copying CIPCA214 from DVA0 .
Copying DFPAA252 from DVA0 ...
Copying KZPSAA11 from DVA0 ...
.
. [The function table displays, followed by the UPD> prompt, as
. shown in Example C–3.]
UPD> list
Device Current Revision
Fsb 3.1-x
Nt 5.68
Pkx0 A11
Srm 5.4-x
Pua A214
C-10 AlphaServer DS20 Service Manual
Filename Update Revision
fsb_fw
nt_fw
kzpsa_fw
srm_fw
cipca_fw
3.x
5.xx
A11
5.4-xx
A2xx