Camera Installation - Defender 2K Product Manual

11 CAMERA INSTALLATION

Test all cameras during setup before installing.
Determine all areas you want to cover and plan out where each camera should be installed.
Make sure there is access to power outlets where the cameras will be installed.
Place cameras up high to ensure the camera view covers the maximum area.
Make sure there are no obstructions in the camera view.
Do not place camera where light will shine in the view – this will obstruct your view and recorded footage.
Protect the camera power cable – install in a place where the wire can be hidden.
Place the camera under shelter to reduce the amount of rain or snow on the lens.
Place the camera so that it is seen – this may deter potential intruders.
Use the provided hardware to install your camera and ensure that they are secure against the wall or ceiling
(not hanging down).
Use the power adapters (provided) to power on the cameras.
66