Padresetarea; Padresetbaudrate; Padresetconnecttimeout - Hand Held Products PadCom TT1500 User Manual

Syntax
BOOL padReset(
void
)
Returns
Returns TRUE upon success, FALSE otherwise.
See Also
padResetArea, padStop, padOff

padResetArea

Resets the minimum and maximum coordinates of the active pad area. This command is used to undo padSetArea (see
page 3-49). It restores the usable area of the pad to the full pad surface.
Syntax
void padResetArea(
void
)
See Also
padGetArea, padSetArea

padResetBaudRate

Sets the communications baud rate to the default baud rate of 9600. Note that the command padOff (see page 3-34) resets
the baud rate back to the baud rate at which the device was initially connected.
Syntax
BOOL padResetBaudRate(
void
)
Returns
Returns TRUE if successful, FALSE otherwise.
See Also
padSetBaudRate, padGetBaudRate, padSetDefaultBaudRate, padGetDefaultBaudRate, padResetDefaultBaudRate

padResetConnectTimeout

This function resets the time-out value used for the com port (both input and output) during the initial connecting phase. After
a connection is established, the time-out values can be adjusted using padSetInTimeout and padSetOutTimeout (see
page 3-55).
Syntax
unsigned int padResetConnectTimeout(
void
)
Returns
Returns the current connection time-out setting
3 - 45