Hand Held Products PadCom TT1500 User Manual page 18

padSetPortIrq
Port Operations:
padGetPort
padGetPorts
padPassThroughHandshaking
padSetPort
padSetPortHandle
padSetPorts
POS Services:
padGetMagTrack
padGetMaxCardTracks
padGetMaxCardTrackSize
padGetAllMagCardTracks
padGetDUKPTbinaryPIN
padGetDUKPTtextPIN
padGetMasterSessionBinaryPIN
padGetMasterSessionTextPIN
padResetMagCard
Prompt Operations:
padPromptReset
padPromptHexNumber
padPromptNum
padPromptNumber
padPromptSignatrue
padPromptString
padPromptTimeout
Scaling of Coordinates Received:
padScale
padScaleDPI
padScaleTo
padScaleX
padScaleY
padToHIENGLISH
padToLOENGLISH
2 - 8
Sets a COM port's interrupt number.
Gets the current communications port.
Gets the current number of ports available.
Enables/disables hardware handshaking (pass through).
Sets the preferred communications port.
Sets the port handle.
Sets the amount of ports available on the PC.
Gets a track of data from a magnetic card.
Get the amount of tracks supported.
Get the maximum card track size in bytes.
Read all tracks on a magnetic card.
Gets a PIN number from the user.
Gets a PIN number from the user.
Gets a PIN number from the user.
Gets a PIN number from the user.
Resets the magnetic card reader and clears the track buffer
Reset all prompts.
Display a hexadecimal number entry prompt.
Display an integer number entry prompt.
Display a decimal number entry prompt.
Display a signature capture prompt.
Display an alphanumeric data entry prompt.
Sets the timeout value for the prompt commands.
Scale an arbitrary value to a given fraction.
Scale to a desired DPI resolution.
Scale to a desired rectangle.
Scale a horizontal coordinate to given DPI.
Scale a vertical coordinate to given DPI.
Scale to units based on 1000ths of inch.
Scale to units based on 100ths of inch.