Hand Held Products PadCom TT1500 User Manual page 19

padToHIMETRIC
padToLOMETRIC
Scan Rate Operations:
padSetConstant
padGetConstant
padSetScanRate
padGetScanRate
Sound Operations:
padSoundBell
padSoundEnable
padSoundSetFreq
padSoundTone
State Information:
padIsOn
padIsNewStroke
padIsPenDown
padIsRecord
padOldX
padOldY
padNewX
padNewY
padName
padType
System and Communication Operations:
padSysIsAvailable
padSysReset
padCommIsAvailable
padCommReset
padCanConfigComm
padConfigComm
padTestComm
padSetCommTimeout
padEchoComm
padGetBaudRate
Scale to units based on 100ths of a millimeter.
Scale to units based on 10ths of a millimeter.
Set a constant scan rate On or Off.
Check if constant scan rate is On or Off.
Set a scan rate.
Get the current scan rate.
Type of sound action to make.
Enable or disable the sound.
The frequency for the sound.
Sound with a frequency and duration.
Check if pad has been turned on.
Check if beginning a new stroke.
Check if the pen is down.
Check if currently recording pad data.
Returns the previous horizontal pen coordinate.
Returns the previous vertical pen coordinate.
Returns the current horizontal pen.
Returns the current vertical pen coordinate.
Get the name of the attached pad.
Get the type of the attached pad.
Check if the system is available.
Reset the system.
Check if the communication port available.
Reset the communications port.
Check if the communications can be configured.
Configure commincations as specified.
Test communications.
Set time-out for communication operation.
Echo data back to the host.
Returns the current baud rate.
2 - 9