NOTE: You cannot use this command to set the "ON" code of a pad that is currently in pass through mode. If a pad is in
pass through mode it will ignore this command and send it to its pass through port.
Syntax
WORD padPassThroughSetOnCode(
char *code,
WORD codeLength
)
Parameter
code
codeLength
Returns
Returns non-zero if successful, zero otherwise.
See Also
padPassThroughOff, padPassThroughResetCodes, padPassThroughSetOffCode, padPassThroughOn
padPortReclaim
Reclaims the port.
Syntax
BOOL padPortReclaim ()
See Also
padPortRelease
padPortRelease
Releases the port.
Syntax
void padPortRelease ()
See Also
padPortReclaim
3 - 38
Description
A buffer containing the binary code used to turn on pass through mode
The length of the binary pass through code in bytes