Advertisement
4
WIRELESS CONNECTION TO YOUR TG588v
You will find the following information on your wireless 'Keep Me'
card, and also on the label on the reverse side of the TG588v:
• SSID Name: The name of your wireless network associated with
your TG588v
• Wireless Key: The password you will need to enter on your PC,
smart phone or tablet to gain access to this network
You can connect to your TG588v using WPS Push Button
Connect by pressing the WPS button on your TG588v and on your
client device.
Alternatively a wireless connection can be established manually
depending on your device type:
WINDOWS 7
1. Open "Connect to a Network" by clicking the network icon
(
or
) in the notification area - bottom right hand corner
of the screen.
2. In the list of available wireless networks, select the network
coresponding to the SSID of your TG588v, and then click
Connect. Once you hit connect you will be asked for a wireless
key which can be found on your wireless 'Keep Me' card or on
the label on the reverse side of the TG588v.
3. Enter the security key and click OK. Wait a minute and you
should now be online.
1
3
Wireless user codes
TG588v v2
Network Name:
TNCAP400B00
Wireless Key:
SN: CP01234ZZKRG
CFDA00FB00
GW: DSLABC008BUBH
4746-7279
MAC: 0AB1C234C56
ACCESS KEY: X1YZWVUTS2
Made in China
Rated Input: 12V
1.5A
WINDOWS 8
1. Select the wireless icon from the panel at the bottom of the Charms
bar.
2. You'll see a list of networks you can connect to. Choose your router's
Wireless name on the list and select Connect.
3. You'll be asked for the network security key. This is the Wireless key
printed on your wireless 'Keep Me' card. Enter the key and click OK.
4. Next you'll be asked about setting up sharing.
Choose the appropriate option to continue.
You should now be connected to your wireless network.
1
2
3
4
CONNECTING AN iPHONE & iPAD
Tap the settings icon on your home screen.
Ensure Wi-Fi is switched on and select your Wireless network
from the list shown
When prompted enter your wireless security key exactly as
shown on your Keep me card. Then select Join
Enter your
wireless
password
here
TROUBLESHOOTING
Ethernet
Green - Cable connected
Flashing - Data transfer
Broadband
Off - No cable/connection
Green - Flashing (fast) - Syncronising
Solid - In sync
USB port
Disabled
Broadband (Grey cable/socket)
If the light is off or continues flashing check your home wiring. If using DSL
filters check that all telephony devices have a filter installed. Also check that
your service activation date has been reached.
Power
If the light fails to show green, check that you are using the power supply
provided with the TG588v gateway and that you have correctly pressed the
power button.
Internet
If continually flashing red, check that your service activation date has been
reached. Then login to the gateway at http://192.168.1.1 and check that
the broadband username and password are correctly entered.
CONNECTING AN ANDROID DEVICE
Tap Apps icon on your home screen then tap the settings icon.
Select Wi-Fi and ensure Wi-Fi is ON. Next select your Wi-Fi
network from the list
When prompted enter your wireless security key exactly as
shown on your Keep me card. Then select Connect
Power
Orange - Device starting up
Green - Ready
Internet
Off - No Broadband / Disabled
Red flashing - Trying to connect
Green - Connected
Green flashing - Data transfer
WPS (+ button)
Off - Inactive
Flashing orange - Pairing
Red - Pair failed
Green - Pairing sucess
Wireless (+ button)
Off - Disabled
Green - Enabled
Green flashing - Data transfer
Button - Push and hold (5 secs) to
disable/enable Wi-Fi
Upgrade
Blue - Receiving firmware update
Note: Do not switch off router
TV
Not used in this release
Advertisement
