curt 13322 Manual

13322
4/10/2020
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
ITEM QTY PART NUMBER
1 2 10-10272
2 2 CM-SP1
3 2 20-00062
4 4 10-10404
5 4 30-00164
6.50 in
PLASTIC
BUMPER
FASCIA
FRAME RAIL
3
HITCH WEIGHT: 30 LBS.
INSTALL TIME: 30 MINUTES
INSTALL NOTES:
- NO DRILLING REQUIRED
- FASCIA TRIMMING MAY BE
REQUIRED FOR SOME MODELS
- CHECK FASCIA BEFORE TRIMMING
INSTALLATION STEPS
1) Lower spare tire and remove existing M14 hex bolts from each frame rail.
2) Raise hitch into position and secure bumper mount with M14 hex bolts and lock washers as shown.
(Leave bolts loose.)
3) Install M14 hardware in rear holes of hitch and install 1/2" carriage bolts, spacers, and flange nuts
in remaining holes as shown.
4) Torque rear M14 bolt first to 126 lb-ft and all 1/2" fasteners to 110 lb.-ft.
5) Reinstall spare tire removed in step (1).
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
'99 - '07 (CLASSIC), '07 - CURRENT (NEW BODY) STYLE
CHEVY/GMC 1500/2500LD SILVERADO, SIERRA, Z71
Parts List
DESCRIPTION
BOLT,CAR,1/2-13 UNC,1-3/4,GRD8,YZ
.250 x 1.50 x 2.00" SQUARE HOLE SPACER
NUT, SER-FLANGE,1/2-13 UNC,GRD8,YZ
HHCS,M14x2,40,CL10.9,YZ
WASHER,S-CON,9/16,YZ
3.00 in
EXISTING WELDNUT
5
4
6,000 LBS. TRAILER WEIGHT &
10,000 LBS. TRAILER WEIGHT &
1
2
EXISTING WELDNUT
INSTALL FIRST
600 LBS. TONGUE WEIGHT.
1,000 LBS. TONGUE WEIGHT
FRAME RAIL