Table of Contents
Advertisement
•
Always replace parts with replacement parts recommended by Stanley Hydraulic Tools.
•
Check fastener tightness often and before each use daily.
SAFETY SYMBOLS
Safety symbols are used to emphasize all operator, maintenance and repair actions which, if not strictly followed,
could result in a life-threatening situation, bodily injury or damage to equipment.
This safety symbol may appear
on the tool. It is used to alert
the operator of an action that
could place him/her or others
in a life threatening situation.
Always observe safety symbols. They are included for your safety and for the protection of the tool.
LOCAL SAFETY REGULATIONS
Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte-
nance personnel.
3
This safety symbol appears in
these instructions to identify
an action that could cause
bodily injury to the operator or
other personnel.
SAFETY Continued . . .
This safety symbol appears in
these instructions to identify
an action or condition that
could result in damage to the
tool or other equipment.
Advertisement
Table of Contents
