Table of Contents
Advertisement
5.0
TECHNICAL SPECIFICATIONS
5.1
Mag-01 and Mag-01H electronics units
Measuring range
Bandwidth (low field probes)
Calibration accuracy
Maximum resolution
Noise
Zero field offset error (@20˚C)
Scaling temperature coefficient
Offset temperature coefficient
Display
Front panel
on/off switch
probe input
charge indicator
sensitivity control (Mag-01H only)
offset control (Mag-01H only)
Rear panel connectors
battery charger inlet
analog output
low field probes
high field probes
output impedance
Enclosure
Operating temperature
Relative humidity
Dimensions
Weight
0 to 0.2mT or 2mT depending on probe
0 to 10Hz, 20μT pk-pk, -12dB per octave roll off
0.1% (for ultimate accuracy see probe specifications)
1nT (Mag-01), 0.1nT (Mag-01H)
<0.5nT pk low field probes
5nT pk high field probes
±5nT
<10ppm/˚C
0.01nT/˚C
4½ digit auto ranging LCD displays 0 to 20μT with 1nT
resolution and 20 to 200μT with 10nT resolution with low field
probes
switches on internal battery
6 pole waterproof Fischer connector
LED illuminated when external supply connected
increases the sensitivity by a factor of 10
allows ±90μT in steps of ±10μT to be subtracted from the field at
the probe
2.1mm socket 6-18V DC 0.5A max., polarity protected,
continuous or intermittent use
4mm insulated sockets
5V full scale 100μT/V(10μT/V with x10 sensitivity on Mag-01H)
2V (min) full scale 1mT/V (0.1mT/V with x10 sensitivity on
Mag-01H)
1kHz
high impact ABS
-10˚C to +50˚C
80% non-condensing
155 x 170 x 68mm
1.5kg
OM0382 ISSUE 8 PAGE 10 OF 14
Advertisement
Table of Contents
