Table of Contents
Advertisement
Chapter 4
4 1
Set Up an IPv6 Connection
If your ISP has provided a line that supports IPv6 connection as well as some detailed
IPv6 parameters, you can manually set up an IPv6 connection.
Follow the steps below to set up an IPv6 connection:
1. Make sure you have set up an internet connection by referring to
setting up an IPv6 connection.
2. Visit http://tplinkmodem.net, and log in with the password you set for the router.
3. Go to
Advanced
configure the following parameters provided by your ISP.
•
DHCPv6 Server:
Select the checkbox to enable DHCPv6 server.
•
Starting IP Address:
addresses.
•
Number of Addresses:
The default value is 255.
•
Address Lease Time:
user will be allowed connection to the modem router with their current dynamic
IP address. Enter the amount of time, in seconds, then the user will be assigned
this dynamic IP address. After the dynamic IP address is expired, the user will be
automatically assigned a new dynamic IP address. The default is 3600 seconds.
•
Rapid Commit:
Select the checkbox to enable the prefix fast distribution function.
•
Unicast:
Select the checkbox to enable the unicast function. The default setting is
disabled.
>
Network
>
IPv6 LAN
Enter a value for the DHCPv6 server to start with when issuing IP
Enter a value between 0-255 for DHCPv6 server preference.
The Address Lease Time is the amount of time in which a network
Configure Internet Connections
Settings. In the
DHCPv6 Server
Quick Start
before
section,
14
Hide quick links:
Advertisement
Table of Contents
