Use The Modem Router As A Dhcp Server - TP-Link CR1900 User Manual

Chapter 10 Specify Your Network Settings
3. Type in a new IP Address appropriate to your needs.
4. Click Save in the DHCP Server section to make the settings effective.
10 2 2

Use the Modem Router as a DHCP Server

You can configure the modem router to act as a DHCP server to assign IP addresses to
its clients. To use the DHCP server function of the modem router, you must configure all
computers on the LAN to obtain an IP address automatically.
Follow the steps below to configure DHCP server.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > Network > LAN Settings page and locate the DHCP Server
section.
57